BATTERY MOUNT AND CANOPY CLIP UPGRADE FOR ALIGN TREX 450 PRO SERIES HELICOPTERS Models: all ALIGN TREX 450 PRO versions (replaces stock Align part #H45051) Note: the AT450P-BMU provides superior strength to the front section of the helicopter, providing an Aluminum tray that supports the entire length of the LiPo battery (anti-taco device!) and an Aluminum canopy clip that incorporates the front landing skid mount for strength and critical alignment. With the new open front section design, it is now possible to tuck the ESC and LiPo wiring underneath the tray for easier canopy placement before flight. The under section of the tray contains an open slot for the battery straps, as well as a flat, I-beam design for ESC mounting and perfect CG alignment for 3D flight. This upgrade will truly bring your TREX 450 Pro to the next level in performance and quality design intent. Includes: - One (1) TREX 450 PRO Aluminum Battery Mount Upgrade - One (1) TREX 450 PRO Aluminum Canopy Clip Upgrade (with integrated landing skid mount) - Six (6) M2.5 x 0.45 x 6 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel) Finish: Clear anodize, mirror-polish CNC gloss Weight: Canopy Clip: 6 g (design is FEA optimized for maximum strength and minimum weight) Battery Tray: 13 g (design is FEA optimized for maximum strength and minimum weight)

450 PRO SERIES UPGRADE KIT FOR ALIGN TREX 450 PRO SERIES HELICOPTERS Models: all ALIGN TREX 450 PRO versions Includes: - One (1) TREX 450 PRO Aluminum Battery Mount and Canopy Clip Upgrade - Six (6) M2.5 x 0.45 x 6 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - One (1) TREX 450 PRO Aluminum Tail Servo Mount Upgrade - Eight (8) M2.5 x 0.45 x 6 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - One (1) TREX 450 PRO Aluminum Anti-Rotation Bracket Upgrade - Two (2) M2.5 x 0.45 x 6 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel)

TAIL SERVO MOUNT UPGRADE FOR ALIGN TREX 450 PRO SERIES HELICOPTERS Models: all ALIGN TREX 450 PRO versions (replaces stock Align part #H45031) Note: the Tail Servo Mount design provides superior tail control and frame rigidity benefits, with an aluminum 6061-T6 frame that provides a solid foundation for the tail servo (no more stripped plastic threads!). Includes: - One (1) TREX 450 PRO Aluminum Tail Servo Mount Upgrade - Eight (8) M2.5 x 0.45 x 6 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel) Finish: Clear anodize, mirror-polish CNC gloss Weight: 11 g (design is FEA optimized for maximum strength and minimum weight)

Tuning Dämpfergummis für T-Rex 450 v2 - rot von Trueblood Engeneering This upgrade replaces the stock o-rings...pack of four (set of two complete sets). The advantages of these dampeners is simple. They are able to produce a more responsive and tighter head dampening response by filling the entire dampening area of the head block with material. The dampeners are designed specifically for the T-Rex 450XL/SE V2 head block and spindle, giving a tight dampening solution without needing to over-compress the rubber with spacers. Also, because of their shape and material, the Pro T-Rex Head Dampeners are able to last much longer. These will not fit the V1 SE/S/SA/XL/X. Should your product come with any moudling flash: 1. Poke a small hole in the flash with an X-Acto blade. 2. Push the spindle through the damper stretching the flash onto the spindle. 3. Take the X-Acto blade and cut around the spindle next to the damper.

Tuning Dämpfergummis T-Rex 450 v2 Super Hard Packungsinhalt: 4 Stück

Titanium Turnbuckles pitch für T-Rex 450

für 12mm Heckrohre für z.B. T-Rex 450

für 12mm Heckrohre für z.B. T-Rex 450