Align 500E FL-760 3G Programmable Flybarless System / Black Design Features: • 3-axis gyroscopic flybarless system to simulate the stability of mechanical flybar system, yet at the same time achieving agile 3D performance. • Utilizes Silicon Micro Machine (SMM) sensors for excellent stability. • 12 bit processors providing ultra high resolution, resulting in highly precise controls • Software upgradable through PC interface adapter (sold separately) • Simplistic setup process without the need of external devices. Setup is done through 5 steps and 2 sensitivity adjustments. Rudder setup is identical to GP780 gyro, minimizing learning curve. • Flybarless system dramatically improves 3D power output and efficiency, resulting in reduced fuel or electricity consumption. • Highly sensitive gyroscopic sensors combined with advanced control detection routine providing higher hovering and aerobatic stability than other flybarless system. • Suitable for all CCPM and mechanical mixing system. • Comaptible with helicopter of all sizes from T-Rex 250 to T-Rex 700. • Innovative Pitch Gau as an aid to facilitate pitch adjustments. • High frame rate signal output for faster and higher precision servo response. • Capable to operate between 4.5V to 8.4V, compatible with high voltage servos. • Small footprint, light weight, minimalists and reliable design. Specification: • Suitable Voltage Range:DC 4.5~8.4V • Current Consumption:<80mA @ 4.8V • Flip and Roll rate detection speed: :±300degrees/sec • Rudder rate detection speed:±500degrees/sec • Sensor resolution:12bit • Operating temperatur:-20?~65? • Operating humidity:0%~95% • RoHS certified • Dimension: Control box:42x26.5x14.5mm Sensor:22.3x21.7x14mm • Weight: Control box:16g Sensor:9g Accessories: • Main Rotor head Set x1 • Flybarless control unit x1 • Flybarless Sensor x1 • Screw bag x1 • Linkage rod A x2 • Linkage ball A x2 • Head Stopper x1 • Mixing base assembly x1 • Pitch Gauge x1 • Signal extension wire 100mm x1 • Signal extension wire 220mm x1 • Sensor mounting foam x2

Align 500E FL-760 3G Programmable Flybarless System / Black inclusive Align 425 CF Blades (H50104T) Design Features: • 3-axis gyroscopic flybarless system to simulate the stability of mechanical flybar system, yet at the same time achieving agile 3D performance. • Utilizes Silicon Micro Machine (SMM) sensors for excellent stability. • 12 bit processors providing ultra high resolution, resulting in highly precise controls • Software upgradable through PC interface adapter (sold separately) • Simplistic setup process without the need of external devices. Setup is done through 5 steps and 2 sensitivity adjustments. Rudder setup is identical to GP780 gyro, minimizing learning curve. • Flybarless system dramatically improves 3D power output and efficiency, resulting in reduced fuel or electricity consumption. • Highly sensitive gyroscopic sensors combined with advanced control detection routine providing higher hovering and aerobatic stability than other flybarless system. • Suitable for all CCPM and mechanical mixing system. • Comaptible with helicopter of all sizes from T-Rex 250 to T-Rex 700. • Innovative Pitch Gau as an aid to facilitate pitch adjustments. • High frame rate signal output for faster and higher precision servo response. • Capable to operate between 4.5V to 8.4V, compatible with high voltage servos. • Small footprint, light weight, minimalists and reliable design. Specification: • Suitable Voltage Range:DC 4.5~8.4V • Current Consumption:<80mA @ 4.8V • Flip and Roll rate detection speed: :±300degrees/sec • Rudder rate detection speed:±500degrees/sec • Sensor resolution:12bit • Operating temperatur:-20?~65? • Operating humidity:0%~95% • RoHS certified • Dimension: Control box:42x26.5x14.5mm Sensor:22.3x21.7x14mm • Weight: Control box:16g Sensor:9g Accessories: • Main Rotor head Set x1 • Flybarless control unit x1 • Flybarless Sensor x1 • Screw bag x1 • Linkage rod A x2 • Linkage ball A x2 • Head Stopper x1 • Mixing base assembly x1 • Pitch Gauge x1 • Signal extension wire 100mm x1 • Signal extension wire 220mm x1 • Sensor mounting foam x2 included: • 425D Carbon Fiber Blades x1

• für T-REX 500 mit Flybarless System • 500FL Hauptrotorzentralstück x 1 • Blattlagerwellenführung x 1 • Dämpfergummi x 2 • Distanzring x 2 • Socket Button Head Collar Screw (M2.5x16mm) x 1 • Mutter (M2.5) x 1

• für T-REX 500 mit Flybarless System • Hauptrotorblatthalter x 2 • MR126ZZ Kugellager x 4 • Kugelkopf A (M3x4) x 2 • Socket Button Head Collar Screw (M3x20mm) x 2 • Mutter (M3) x 2

• für T-REX500 mit Flybarless System • Unterlegscheibe x 2 • Umlenkhebel x 2 • FMR52ZZ Kugellager x 4 • MR63ZZ Kugellager x 4 • 500 Mischhebel x 2 • 500FL Metal control arm x 2 • Socket button head screw (M2x5) x 4 • Socket button head screw (M3x14) x 1 • Socket button head screw (M3x16) x 1

• für T-REX 500 mit Flybarless System • Pitchlehre x 1 • Socket button head screw (M2x6mm) x 1

• für T-REX 500 mit Flybarless System • Kugelkopf A (M2x3.5) x 2 • Kugelkopf A (M2.5x3.5) x 2 • Kugelkopf A (M3x4) x 2

• für T-REX 500 mit Flybarless System • Steuergestänge x 2 • Kugelkopf x 4