ANTI-ROTATION BRACKET UPGRADE FOR ALIGN TREX 500 SERIES HELICOPTERS Models: all ALIGN TREX 500 versions (replaces stock Align part #H50121) Note: the Anti-Rotation Bracket design utilizes high-end CNC machining to produce tight and accurate tolerances throughout the part, giving you the highest-level of flight control and accuracy available today. Includes: - One (1) TREX 500 Aluminum Anti-Rotation Bracket Upgrade Finish: Clear anodize, mirror-polish CNC gloss Weight: 7 g (design is FEA optimized for maximum strength and minimum weight)

BOTTOM BRACKET UPGRADE FOR ALIGN TREX 500 SERIES HELICOPTERS Models: all ALIGN TREX 500 versions (replaces stock Align part #H50021) Includes: - One (1) TREX 500 Aluminum Bottom Bracket Upgrade - Six (6) M2.5 x 0.45 x 10 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - Two (2) M2.5 x 0.45 x 12 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - Four (4) M2 x 0.4 x 10 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) Finish: Clear anodize, mirror-polish CNC gloss Weight: 42 g (design is FEA optimized for maximum strength and minimum weight)

BATTERY MOUNT UPGRADE FOR ALIGN TREX 500 SERIES HELICOPTERS Models: all ALIGN TREX 500 versions (replaces stock Align part #H50021) Note: the primary pocket dimension (shown in the image above) was designed to fit the majority of commonly used ESCs including: * Align 75A RCE-BL75G and 60A RCE-BL60G (Stock ESC) * Castle Creations Phoenix series (-125, --80, -60, and -45) * Kontronik Jazz series (80-6-18, 55-10-32, and 40-6-18) * Kontronik Jive series (100+ LV, 80+ LV, and 80+ HV) * Scorpion 6-Cell ESC with Switching BEC series (90 Amp, 60 Amp, and 45 Amp) * Scorpion Commander series (60A) Actual dimensions for the pocket are 1.38" (35 mm) Wide x 2.68" (68 mm) Long Includes: - One (1) TREX 500 Aluminum Battery Mount Upgrade - Two (2) M2.5 x 0.45 x 14 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - Two (2) M2.5 x 0.45 x 8 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) Finish: Clear anodize, mirror-polish CNC gloss Weight: 22 g (design is FEA optimized for maximum strength and minimum weight)

500 SERIES UPGRADE KIT FOR ALIGN TREX 500 SERIES HELICOPTERS Models: all ALIGN TREX 500 versions Includes: - One (1) TREX 500 Aluminum Bottom Bracket Upgrade - Six (6) M2.5 x 0.45 x 10 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - Two (2) M2.5 x 0.45 x 12 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - Four (4) M2 x 0.4 x 10 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - One (1) TREX 500 Aluminum Battery Mount Upgrade - Two (2) M2.5 x 0.45 x 14 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - Two (2) M2.5 x 0.45 x 8 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - One (1) TREX 500 Aluminum Receiver Mount Upgrade - Four (4) M2.5 x 0.45 x 8 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)

METAL BEARING BLOCK UPGRADE FOR ALIGN TREX 500 SERIES HELICOPTERS Models: all ALIGN TREX 500 versions (replaces stock Align part #H50050 and H50075) Note: the Metal Bearing Block design utilizes high-end CNC machining to produce tight and accurate tolerances throughout the part, giving you the best quality upgrade product on the market. With the addition of the thrust-bearings to support all axial loads, more power will be available for hard pitch-pumps, 3D maneuvers, and autorotations; as well as protecting the integrity of the radial bearings. METAL BEARING BLOCK UPGRADE FOR ALIGN TREX 500 SERIES HELICOPTERS Item Number: AT500-MBB Installation Diagram: CLICK HERE Price: $37.95 Need Replacement Bearings? CLICK HERE Models: all ALIGN TREX 500 versions (replaces stock Align part #H50050 and H50075) Note: the Metal Bearing Block design utilizes high-end CNC machining to produce tight and accurate tolerances throughout the part, giving you the best quality upgrade product on the market. With the addition of the thrust-bearings to support all axial loads, more power will be available for hard pitch-pumps, 3D maneuvers, and autorotations; as well as protecting the integrity of the radial bearings. Includes: - One (1) TREX 500 Aluminum Metal Bearing Block Upgrade Set (Upper and Lower) - Two (2) Radial Ball Bearings 8 x 16 x 5 mm - Two (2) Thrust Ball Bearings 8 x 15 x 5 mm - Two (2) Round Hole Shims 8.1 x 12 x 1 mm Finish: Clear anodize, mirror-polish CNC gloss Weight: 11 g ea. (design is FEA optimized for maximum strength and minimum weight)

RECEIVER MOUNT UPGRADE FOR ALIGN TREX 500 SERIES HELICOPTERS Models: all ALIGN TREX 500 versions (replaces stock Align part #H50021) Note: channels have been provided for tie-down straps, zip-ties, and other fastening methods for the receiver and/or gyro electronics. Includes: - One (1) TREX 500 Aluminum Receiver Mount Upgrade - Four (4) M2.5 x 0.45 x 8 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) Finish: Clear anodize, mirror-polish CNC gloss Weight: 8 g (design is FEA optimized for maximum strength and minimum weight)

500 SERIES UPGRADE XKIT FOR ALIGN TREX 500 SERIES HELICOPTERS Models: all ALIGN TREX 500 versions Includes: - One (1) TREX 500 Aluminum Bottom Bracket Upgrade - Six (6) M2.5 x 0.45 x 10 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - Two (2) M2.5 x 0.45 x 12 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - Four (4) M2 x 0.4 x 10 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - One (1) TREX 500 Aluminum Battery Mount Upgrade - Two (2) M2.5 x 0.45 x 14 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - Two (2) M2.5 x 0.45 x 8 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - One (1) TREX 500 Aluminum Receiver Mount Upgrade - Four (4) M2.5 x 0.45 x 8 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - One (1) TREX 500 Aluminum Anti-Rotation Bracket Upgrade - One (1) TREX 500 Aluminum Metal Bearing Block Upgrade Set (Upper and Lower) - Two (2) Radial Ball Bearings 8 x 16 x 5 mm - Two (2) Thrust Ball Bearings 8 x 15 x 5 mm - Two (2) Round Hole Shims 8.1 x 12 x 1 mm

Static Wick (Part# GFA7088) Dissipates excess static build up that is partly caused by a belt driven heli or the tail blades. The static wick can also reduce possible interference to receivers especially 2.4Ghz. High enough static could cause a 2.4Ghz lockout completely. Complete bolt on kit with installation instructions.

T-Rex 500 Gerippte Motorhalterung The finned motor mount for the T-Rex 500 is designed to dissipate additional heat from the motor casing. Ideal for setups using 6s batteries and hot running motors. - CNC machined from billet - Deep fins for rapid heat dissipation - Silver anodized

The G-Force ESD plate is a bolt-on upgrade that will electrically ground the tail boom and belt to a CF frame. This will reduce the interference that is caused by static generated by the belt and tail blades. The ESD plate is most effective when used with a CF frame. When used on a GF frame, only the tail boom and belt is ground together. It is highly recommended that the G-Force Static Wick (Part #GFA7088) to be used with the G-Force ESD Plate to discharge the static quickly into the atmosphere. Bolt on installation with complete instructions.

2 x Hauptrotorblatthalter 2 x Socket collar screw (M3x20mm) 2 x M3x3.5 Kugelkopf D (4.75x17.5mm) 2 x M3 Mutter 4 x Kugellager MR126ZZ (6x12x4mm)

1 x Hauptrotornabe Metall 2 x Dämpfergummi 85° (6.1x11x4mm) 2 x Unterlegscheibe (6.1x10.5x1.5mm) 2 x Pin (2x28mm) 1 x Socket collar screw (M2.5x19mm) 1 x M2.5 Mutter

1 x Kopfbremse Metall (34x7mm) 1 x Socket screw (M2x8mm)

2 x Steuerungshebel 2 x Steuerungsstab (4.3x74.2mm) 4 x Schraube (M3x5mm) 2 x M3 Madenschraube (M3x4mm)

1 x Paddelwippe 2 x Kugellager MR83ZZ (3x8x3mm) 2 x Kugellager MR74ZZ (4x7x2.5mm) 2 x M3 collar screw (M3x9.6mm) 2 x Socket button head screw (M3x12mm) 2 x Unterlegscheibe (3x4.8x0.3mm)

1 x 500 Metalplatte links 1 x 500 Metalplatte rechts 1 x 500 Heckrotorgehäuse f. Riemenantrieb (16x18x40.8mm) 1 x 500 Heckanlenkung Halterung (14.6x5x10mm) 1 x Aluminum Bolzen (4x17.3mm) 1 x 500 Riemenrad (19T) 2 x 500 Riemenradabdeckung 1 x 500 Heckrotorwelle (4x56.8mm) 2 x Kugellager 684ZZ (4x9x4mm) 1 x Socket screw (M2.5x10mm) 9 x Socket button head screw (M2.5x5mm)

2 x Lagerbock Metall 2 x Kugellager MR688ZZ (8x16x5mm) 8 x Socket screw (M2x6mm) 8 x Socket button head collar screw (M3x10mm) 8 x M2.5 Unterlegscheibe (2.5x6x2mm)

2 x Heckrotorblatt 2 x Landegestell 2 x Paddel 6 x M3 Madenschraube (M3x4mm) 4 x Sticker

2 x Heckrotorblatt 2 x Landegestell 2 x Paddel 6 x M3 Madenschraube (M3x4mm) 4 x Sticker

2 x Heckrotorblatt 2 x Landegestell 2 x Paddel 6 x M3 Madenschraube (M3x4mm) 4 x Sticker

2 x Heckrotorblatt 2 x Landegestell 2 x Paddel 6 x M3 Madenschraube (M3x4mm) 4 x Sticker

2 x Steuerungsverbindung 1 x Metal T Type Arm 1 x Kugellagerhalterung 1 x Unterlegscheibe (6x7.4x2mm) 2 x Hülse A (2x3x4mm) 2 x Hülse B (2x3x3mm) 4 x Collar screw (M2x8mm) Kugelkopf A (T2.6x (T2.6x3.5) x 1 (4.75x8 2 x Kugellager MR106ZZ (6x10x3mm) 1 x Schiebehülse (4x7x15.2mm)

2 x Heckrotorblatt Art: Symmetrisch Gewicht: 3g/Stück Länge: 70mm Breite: 4.9mm Bohrung: 3mm

1 x Metal tail unit set 1 x Torque tube drive set (5x6x467mm) 1 x Torque tube drive bearing holder (14.5x7.5x10mm) 1 x Tail boom mount set 1 x Vertical stabilizer mount 1 x Tail Boom (15x16x461mm) 3 x Pin (1.5x8.8mm) 4 x Bearing MR128 (MR128) 1 x Bearing MR106ZZ (6x10x3mm) 4 x Bearing 684ZZ (4x9x4mm) 2 x Socket collar screw (M2.5x19mm) 2 x Socket screw (M3x10mm) 8 x Socket button head screw (M2.5x10mm) 7 x Socket button head screw (M2.5x5mm) 10 x M2.5 Special washer (2.5x6x2mm) 4 x Aluminum hexagonal bolt (4x35.7mm) 2 x M3 nut (M3xT2mm)

1 x Starrantriebswelle (5x6x467mm) 2 x Endkappe (2x5.9x32mm) 1 x Gummilagerbock (14.5x7.5x10mm) 1 x Kugellager MR106ZZ (6x10x3mm)

2 x Vorderes Heckrotorgetriebe (4x4.7x42mm) 2 x Vorderes Schirmgetriebe lang 25T (18.5x8x25.4mm) 2 x Vorderes Schirmgetriebe kurz 25T (18.5x6.5x11.8mm) 2 x Pin (1.5x8.8mm)

1 x Heckrotorwelle für Starrantrieb (4x4.6x61.75mm) 1 x Hinteres Heckrotorgetriebe 25T (18.5x8x25.4mm)

2 x Gummilagerbock (14.5x7.5x10mm) 2 x Kugellager MR106ZZ (6x10x3mm)

1 x Heckrohr Carbon (15x16x461mm)

2 x Heckservohalter (16x12x7.4mm) 2 x Socket button head screw (M2.5x8mm) 2 x M2.5 Unterlegscheibe (2.5x6x2mm)

1 x Leitwerkshalterung (oben) 1 x Leitwerkshalterung (unten) 1 x Höhenleitwerk Carbon 2 x Flachkopfschrauben (M2.5x16mm) 2 x Flachkopfschrauben (M2.5x10mm) 4 x M2.5 Unterlegscheibe (2.5x6x2mm)

The parts of Metal Tail Torque Tube Unit and Metal Tail Belt Unit can not be used universally mutually. 1 x Metal plate (L) 1 x Metal plate (R) 1 x Metal tail unit 1 x Control arm mounting bolt 1 x Tail rotor shaft assembly 1 x Aluminum bolt (4.98x24mm) 1 x Front long umbrella gear-25T (18.5x8x25.4mm) 1 x Bushing (10.5x11.9x12.5mm) 2 x Bearing MR128 (8x12x2.5mm) 2 x Bearing 684ZZ (4x9x4mm) 2 x Socket collar screw (M2.5x19mm) 8 x Socket button head screw (M2.5x5mm) 2 x M2.5 special washer (2.5x6x2mm) 1 x Vertical stabilizer mount

2 x Carbon Paddel 4 x M3 Madenschraube (M3x3mm) Abmessungen: 65.6x42x8mm Gewicht: 7.4g/Stück

2 x Heckrotorblatthalter Metall 2 x Kugellager MR95ZZ (5x9x3mm) 1 x Heckrotornabe (9x36.4mm) 2 x Drucklager (3x8x3.5mm) 2 x Unterlegscheibe (2x6x0.6mm) 2 x Socket screw (M2x6mm) 1 x M4 Madenschraube (M4x3mm) 2 x Socket button head collar screw (M3x12mm)

2 x Heckrotorblatthalter Metall 2 x Kugellager MR95ZZ (5x9x3mm) 1 x Heckrotornabe (9x36.4mm) 2 x Drucklager (3x8x3.5mm) 2 x Unterlegscheibe (2x6x0.6mm) 2 x Socket screw (M2x6mm) 1 x M4 Madenschraube (M4x3mm) 2 x Socket button head collar screw (M3x12mm)

2 x Thumbscrews 2 x Standoffs Made from 7075-T6 Aluminum,hardcoat annodized black w/anoseal and weighing only 5 grams per set these mounts are manufactured with AVT™ ,Anti Vibration Technology. Made for a custom fit on the Align 500 helicopter these mounts provide added main gear clearance and mount right to the anti rotation bracket with no modifications required.

2 x Quick Release Pins 2 x Quick Release Standoffs 4 x Fuel Resistant Viton™ O-Rings 500 Electric/Nitro Quick Release Canopy mount features a custom locking push/pull pin design made to fit the Align 500 Nitro Helicopter. Quick Release pin is made from carbon steel, bright zinc plated with stainless steel components and is designed to stay connected to the canopy. Standoff is made from 6061-T6 aluminum and hardcoat annodized black w/anoseal. Comes with Viton fuel resistant o-rings.

Tuning Dämpfergummis für T-Rex 500 - grün von Trueblood Engeneering Packungsinhalt: 2 Stück Durchmesser: 0,4mm

Informationen...