Aktionspreis CHF 7.55 anstatt CHF 8.40 Original Align Reparatur-Tuch, 75 x 48 cm

Aktionspreis CHF 11.60 anstatt CHF 12.90 • Use for T-REX 600/600 Nitro¡C • Ultra-high hardness foam, high wear resistance, makes your blades more stable¡C • Features a fixing hole of flybar rod for adjusting the pitch and the setting of main blade¡C • Main blade holder x 1(foam)

Aktionspreis CHF 78.20 anstatt CHF 86.90 Speziell für T-REX 550 gefertigt. Wasserabweisendes Material gefüttert mit Schaumstoff, stabile Bodenplatte für optimalen Schutz. 1. Rotorblätter zusammenklappen und mit Rotorblattauflage am Heckrohr fixieren. 2. Bei Paddelköpfen: Madenschraube lösen und Paddelstange nach hinten ziehen. Lieferumfang 1 x Transporttasche für T-REX 550

Aktionspreis CHF 78.20 anstatt CHF 86.90 Speziell für T-REX 550 gefertigt. Wasserabweisendes Material gefüttert mit Schaumstoff, stabile Bodenplatte für optimalen Schutz. 1. Rotorblätter zusammenklappen und mit Rotorblattauflage am Heckrohr fixieren. 2. Bei Paddelköpfen: Madenschraube lösen und Paddelstange nach hinten ziehen. Lieferumfang 1 x Transporttasche für T-REX 550

Aktionspreis CHF 116.10 anstatt CHF 129.00 Features: • Large-sized high efficiency heatsink makes the ESC stable under large current output. • 5-6V step-less adjustable BEC output allowing custom voltage setting to match servo specification. • BEC output utilizing switching power system, suitable for 7.4 - 22.2V (2s-6s) Li battery, with continuous current rating of 3A, and burst rating of 5A. • Three programmable throttle speed settings to support quick throttle response. • Include soft start and governor mode. • Small and compact PCB design for lightweight and simple installation. • Large heat sink for optimum thermal performance. • Highly compatible to work with 98% of all brushless motors currently on themarket. • Ultra-smooth motor start designed to run with all kinds of brushless motors. • The power inlet utilizes a Japanese made 'Low ESR' capacitor inorder to provide stable power source. • The throttle has more than 200 step resolution that provides great throttleresponse and control. • If the aircraft should land or crash in an unexpected location and become lost, the pilot can enable the Aircraft Locator Option. The Aircraft Locator Option is engaged by tuming off the transmitter. When the ESC does not receive a signal from the transmitter for 30 seconds, it will start to send an alarm to the motor. The sound of the alarm will aid the pilot to locate the aircraft. This option will not work with a PCM receiver that has SAVE function enabled, or with low noise resistant PM receivers. Specification: • Continuous current: 70A with porper air flow • Surge current: 110A (5sec) • Supporting motor types: 2-10 pole in/outrunner brushless motors. • Supporting maximum RPM: 2 poles - 190,000rpm; 6 poles - 63,000rpm • Supporting input voltage: 5.5V - 25.2V • Supporting battery types: Li-ion/ Li-poly 2-6 cells • BEC output voltage: 5-6V step-less adjustment • Continuous current 3A; Burst current 5A • Size: 65x31x18mm • Weight: 72g NOTE: 1. When setting to the Quick response speed, the acclerativepeak current will increase. 2. To minimize possible radio interference induced by switching power system, BEC should be installed at least 5cm away from the receiver. The use of PCM receiver is recmmonded. Accessories: • ALIGN standard 4mm gold socket terminal 3 pcs • Heat shrink tube x 3 pcs (5x28mm) (Alte Artikelnummer: HEV70A01)

RC Flyer 550/600 Taumelscheibeneinstellhilfe

Traininggestell für 500-550 Helis