PERFORMANCE TAIL UPGRADE V2 FOR ALIGN TREX 600 & 700 SERIES HELICOPTERS Models: all ALIGN TREX 550, 600E/ESP, 600N, and 700N versions (replaces stock Align part #H60046) Note: the Performance Tail Upgrade V2 provides superior tail control for sport and hard 3D flying styles. With dual flanged, radial ball bearing supported tail grips and a dual radial ball bearing, fully-supported thrust bearing tail rotor assembly, the new upgrade kit provides a truly slop-free, high-performance tail that is rock-solid for all maneuvers. The design is a simple retrofit for the common Align parts on the helicopter, with the ability to be used on all TREX 600E/ESP, 600 Nitro, and 700 Nitro helicopters on the market and installed in a matter of minutes. Includes: - Two (2) TREX 600/600N/700N Aluminum Tail Control Link V2 Upgrades - Two (2) Radial Ball Bearings 3 x 10 x 4 mm - Four (4) Flanged Radial Ball Bearings 2 x 5 x 2.5 mm - Two (2) M3 x 0.4 x 12 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - Two (2) M2 x 0.4 x 8 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - Two (2) M3 Flat Washers (Zinc-Plated Alloy Steel) Finish: Clear anodize, brushed CNC matte

PERFORMANCE TAIL UPGRADE V2 FOR ALIGN TREX 600 & 700 SERIES HELICOPTERS Models: all ALIGN TREX 550, 600E/ESP, 600N, and 700N versions (replaces stock Align part #H60046) Note: the Performance Tail Upgrade V2 provides superior tail control for sport and hard 3D flying styles. With dual flanged, radial ball bearing supported tail grips and a dual radial ball bearing, fully-supported thrust bearing tail rotor assembly, the new upgrade kit provides a truly slop-free, high-performance tail that is rock-solid for all maneuvers. The design is a simple retrofit for the common Align parts on the helicopter, with the ability to be used on all TREX 600E/ESP, 600 Nitro, and 700 Nitro helicopters on the market and installed in a matter of minutes. Includes: - Two (2) TREX 600/600N/700N Aluminum Tail Control Link V2 Upgrades - Two (2) Radial Ball Bearings 3 x 10 x 4 mm - Four (4) Flanged Radial Ball Bearings 2 x 5 x 2.5 mm - Two (2) M3 x 0.4 x 12 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - Two (2) M2 x 0.4 x 8 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - Two (2) M3 Flat Washers (Zinc-Plated Alloy Steel) Finish: Clear anodize, brushed CNC matte

AT550/600/700-VSM Vertical Stabilizer Mount Upgrade for Align T-Rex Includes: - One (1) E-Conversion Aluminum Vertical Stabilizer Mount Finish: Clear anodize, mirror-polish CNC gloss Weight: 2 g (design is FEA optimized for maximum strength and minimum weight)

FLYBARLESS MAIN ROTOR HOUSING FOR ALIGN TREX 550/600 SERIES HELICOPTERS Includes: - One (1) TREX 550/600 Series Aluminum Flybarless Main Rotor Housing - Four (4) M3 x 0.5 x 14 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) Finish: Clear anodize, mirror-polish CNC gloss Weight: 59 g (design is FEA optimized for maximum strength and minimum weight)

ELECTRONICS MOUNT UPGRADE FOR ALIGN TREX 600 NITRO SERIES HELICOPTERS Models: all ALIGN TREX 600 NITRO versions (replaces stock Align part #HN6024) Note: the Electronics Mount design incorporates a new gyro mount capable of utilizing all profiles of gyros available on the market without interference with the canopy. This allows much greater freedom in choosing the gyro of your choice and the strong Aluminum frame protects your valuable electronics in case of a crash. Includes: - One (1) TREX 600 Nitro Aluminum Electronics Mount Upgrade - Four (4) M3 x 0.5 x 10 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) Finish: Clear anodize, mirror-polish CNC gloss Weight: 69 g (design is FEA optimized for maximum strength and minimum weight)

GYRO MOUNT UPGRADE FOR ALIGN TREX 600 NITRO SERIES HELICOPTERS Models: all ALIGN TREX 600 NITRO versions (replaces stock Align part #HN6051) Note: due to the limitations of the upgrade and stock Align design, only low profile gyros (such as the Spartan RC ds760) can be used on the mount due to interference issues with the canopy. If you would like to use other gyro styles, check out the latest all-inclusive upgrade, TREX 600N Electronics Mount Aluminum Upgrade, which incorporates a gyro mount compatible with all sizes of gyros available on the market and a strong Aluminum frame to protect your valuable electronics. Includes: - One (1) TREX 600 Nitro Aluminum Gyro Mount Upgrade - Two (2) M3 x 0.5 x 8 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) Finish: Clear anodize, mirror-polish CNC gloss Weight: 9 g (design is FEA optimized for maximum strength and minimum weight)

600 NITRO SERIES UPGRADE KIT FOR ALIGN TREX 600 NITRO SERIES HELICOPTERS Models: all ALIGN TREX 600 NITRO versions Includes: - One (1) TREX 600 Nitro Aluminum Electronics Mount Upgrade - Four (4) M3 x 0.5 x 10 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - One (1) TREX 600 Nitro Aluminum Gyro Mount Upgrade - Two (2) M3 x 0.5 x 8 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - One (1) TREX 600 Nitro Aluminum Metal Bearing Block Upgrade Set (Upper and Lower) - Two (2) Radial Ball Bearing 10 x 19 x 5 mm - Two (2) Thrust Ball Bearing 10 x 18 x 5.5 mm - Two (2) Round Hole Shim 10.1 x 14 x 1 mm

METAL BEARING BLOCK UPGRADE FOR ALIGN TREX 600 NITRO SERIES HELICOPTERS Models: all ALIGN TREX 600 NITRO versions (replaces stock Align part #HN6011) Note: the Metal Bearing Block design utilizes high-end CNC machining to produce tight and accurate tolerances throughout the part, giving you the best quality upgrade product on the market. With the addition of the thrust-bearings to support all axial loads, more power will be available for hard pitch-pumps, 3D maneuvers, and autorotations; as well as protecting the integrity of the radial bearings. This is the first upgrade on the market to provide full clearance for the elevator arm upgrade, while allowing for +/-14° pitch range using an offset upper mount. Includes: - One (1) TREX 600 Nitro Aluminum Metal Bearing Block Upgrade Set (Upper and Lower) - Two (2) Radial Ball Bearings 10 x 19 x 5 mm - Two (2) Thrust Ball Bearings 10 x 18 x 5.5 mm - Two (2) Round Hole Shims 10.1 x 14 x 1 mm Finish: Clear anodize, mirror-polish CNC gloss Weight: 16 g ea. (design is FEA optimized for maximum strength and minimum weight)

METAL BEARING BLOCK UPGRADE FOR ALIGN TREX 600 NITRO SERIES HELICOPTERS Models: all ALIGN TREX 600 NITRO versions (replaces stock Align part #HN6011) Note: the Metal Bearing Block design utilizes high-end CNC machining to produce tight and accurate tolerances throughout the part, giving you the best quality upgrade product on the market. With the addition of the thrust-bearings to support all axial loads, more power will be available for hard pitch-pumps, 3D maneuvers, and autorotations; as well as protecting the integrity of the radial bearings. This is the first upgrade on the market to provide full clearance for the elevator arm upgrade, while allowing for +/-14° pitch range using an offset upper mount. Includes: - One (1) TREX 600 Nitro Aluminum Metal Bearing Block Upgrade Set (Upper and Lower) - Two (2) Radial Ball Bearings 10 x 19 x 5 mm - Two (2) Thrust Ball Bearings 10 x 18 x 5.5 mm - Two (2) Round Hole Shims 10.1 x 14 x 1 mm Finish: Clear anodize, mirror-polish CNC gloss Weight: 16 g ea. (design is FEA optimized for maximum strength and minimum weight)

Includes: - One (1) TREX 600 Nitro Series Aluminum Rear Frame Mounting Block - Two (2) TREX 600 Series Stainless Steel Lower Stabilizer Mount Adapters - Two (2) M3 x 0.5 x 16 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - Two (2) M3 Flat Washers (Stainless Steel) - Four (4) M3 x 0.5 Nylon-Insert Locknuts (Zinc-Plated Class 8 Alloy Steel) Finish: Clear anodize, mirror-polish CNC gloss Weight: Rear Frame Mounting Block: 4 g (design is FEA optimized for maximum strength and minimum weight) Lower Stabilizer Mount Adapters: 2 g ea. (design is FEA optimized for maximum strength) Material: Aluminum 6061-T6, Stainless Steel 17-4PH Models: all ALIGN TREX 600 Nitro series. Note: the TREX 600 Nitro Series Tail Boom Brace Vibration Management System is the ideal solution for preventing the problematic loosening and resultant failure of the tail boom braces caused by the high-vibration nature of the Nitro helicopter. Due to the caustic and high-frequency vibration environment of the Nitro engine, this upgrade is a necessary enhancement to maintain the structural integrity and performance of the helicopter mechanics, without continuous maintenance required. Important: the Vibration Management System is a series of upgrades to significantly improve the vibration-resistance of the Tail Boom Brace attachment locations for proper operation of the Nitro helicopter.

Aktionspreis CHF 215.10 anstatt CHF 239.00 Limited Edition Hauptrotorkopf für T-Rex 600 Nitro

Informationen...

Heckstrebenverbinder - zur Verringerung der Schwingungen daraus resultiert höhere Empfindlichkeit des Gyros möglich

Alle LYNX Tuningteile wurden via CAD in Verbindung mit FEM entworfen und gefertigt um höchste Stabilität bei geringstem Gewicht zu erreichen. Maximale präzision für maximale performance! Material: 7075-T6 Aluminum Gewichtt: 14g Lieferumfang: 1 Stück

Alle LYNX Tuningteile wurden via CAD in Verbindung mit FEM entworfen und gefertigt um höchste Stabilität bei geringstem Gewicht zu erreichen. Maximale präzision für maximale performance! Material: 7075-T6 Aluminum Gewicht: 16g (Gesamt) Lieferumfang: 3 Stück

Aktionspreis CHF 19.00 anstatt CHF 29.00 2 x Thumbscrews 2 x Standoffs Canopy Mount Features -Unique thumbscrew design retains thumbscrew in canopy when not in use -Components are hardcoat annodized w/anoseal to a surface hardness of 45-55 Rockewell 'C' -AVT™ makes your thumbscrews better resistant to loosening caused by transverse vibration -Weight 8 grams per kit Made from 7075-T6 Aluminum,hardcoat annodized black w/anoseal for EXTREME duability this kit replaces the 2 factory standoffs on your Align 600 Nitro series helicopter and provides a positive canopy locking system. Requires use of stock ALIGN canopy grommets

2 x Quick Release Pins 2 x Quick Release Standoffs 4 x Fuel Resistant Viton™ O-Rings 600 Nitro Quick Release Canopy mount features a custom locking push/pull pin design made to fit the Align 600 Nitro Helicopter. Quick Release pin is made from carbon steel, bright zinc plated with stainless steel components and is designed to stay connected to the canopy. Standoff is made from 6061-T6 aluminum and hardcoat annodized black w/anoseal. Comes with Viton fuel resistant o-rings. Kit is designed for use with the stock Align V1 Canopy.Use of any other canopy may affect the intended performance of this kit.

Tuning Dämpfergummis für T-Rex 600 - grün von Trueblood EngeneeringThese Dampeners are made from a new Super Hard Green material. These are by far the hardest most durable Dampeners available to date!This upgrade replaces the stock Align Dampeners. The advantages of these dampeners is simple. They are able to produce a more responsive and tighter feeling Heli by filling the entire dampening area of the head block with harder, and longer lasting material. The dampeners are designed specifically for the Trex 700 head block and spindle, giving a tight dampening solution without needing to over-compress the rubber with spacers.Packungsinhalt: 2 Stück

* This Titanium buckle have a right-hand thread at one end, while other end is left hand-thread. * Blade pitch angle can be adjusted easily, without snap off the linkage. * Just turn the buckle with the small tool to adjust its length.