AT550/600/700-VSM Vertical Stabilizer Mount Upgrade for Align T-Rex Includes: - One (1) E-Conversion Aluminum Vertical Stabilizer Mount Finish: Clear anodize, mirror-polish CNC gloss Weight: 2 g (design is FEA optimized for maximum strength and minimum weight)

BATTERY TRAY UPGRADE FOR ALIGN TREX 700 ELECTRIC SERIES HELICOPTERS The Battery Tray Upgrade provides the best support for the LiPos during flight, with an ultra-light and high-strength frame design that is a perfect match to the stock rails of the TREX 700E design and the KDE Direct TREX 700E Receiver Mount Upgrade. In addition, the upgrade includes four KDE Direct LiPo Retaining Straps optimally sized for the four LiPo channel slots incorporated into the tray design; providing optimal security and slop-free retention of the LiPos during extreme 3D maneuvers. Includes: - One (1) TREX 700E Series Aluminum Battery Tray Upgrade - Four (4) KDE Direct LiPo Retaining Straps Finish: Clear anodize, mirror-polish CNC gloss Weight: 53 g (design is FEA optimized for maximum strength and minimum weight)

THRUSTED METAL BEARING BLOCK SET FOR ALIGN TREX 700 ELECTRIC SERIES HELICOPTERS Material: Aluminum 6061-T6 Models: all ALIGN TREX 700E series (replaces stock Align part #H70045) Important Notice: due to the restricted design space around the main shaft components, the KDEDirect Product AT700N-ESM (sold separately) is highly recommended for proper installation. The stock plastic Elevator Servo Mount can be used, but significant modifications to the stock part (inner side wall) will be required to prevent interference with the bearing block components. Includes: - Two (2) TREX 700E Series Aluminum Thrusted Metal Bearing Blocks - One (1) TREX 700E Series Aluminum Elevator Lever Upgrade - Two (2) Radial Ball Bearings 12 x 24 x 6 mm - Two (2) Thrust Ball Bearings 12 x 23 x 7.5 mm - Two (2) Round Hole Shims 12.1 x 16 x 1 mm Finish: Clear anodize, mirror-polish CNC gloss Weight: Thrusted Bearing Blocks: 19 g ea. (design is FEA optimized for maximum strength and minimum weight) Elevator Lever Upgrade: 8 g (design is FEA optimized for maximum strength and minimum weight)

Includes: - One (1) TREX 700E Series Aluminum Rear Frame Mounting Block - Four (4) M3 x 0.5 x 8 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - Two (2) M4 x 0.7 x 16 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) Finish: Clear anodize, mirror-polish CNC gloss Weight: 12 g (design is FEA optimized for maximum strength and minimum weight) Models: all ALIGN TREX 700E series (replaces stock Align part #H70049). Note: the Rear Frame Mounting Block design provides superior tail control and authority, with an Aluminum 6061-T6 crossbar construction that prevents flex during high-torque maneuvers of both the helicopter rear frame section and the connected tail boom braces. The upgrade incorporates the landing skid mounts and crossbar into one high-strength design; offering significantly improved stiffness and strength of this critical area for tail support and resultant control.

RECEIVER MOUNT UPGRADE FOR ALIGN TREX 700 ELECTRIC SERIES HELICOPTERS Material: Aluminum 6061-T6 Models: all ALIGN TREX 700E series Note: the Receiver Mount Upgrade is the optimal upgrade for the TREX 700E, providing excellent strength characteristics to protect the valuable electronics in the front of the helicopter; while also solving the problematic, tail-heavy center-of-gravity (CG) nature of the stock helicopter. With an integrated battery tray rail system and a dual-captured strap slot design, the pilot can now adjust the location of the LiPos for optimal CG balance. In addition, the shear-strength of the Aluminum front rails will support the stock plastic-rails that are prone to break in high-power, hard-3D flying conditions; giving the pilot piece-of-mind to fly the helicopter to it�Œs utmost potential. Includes: - One (1) TREX 700E Series Aluminum Receiver Mount Upgrade - Four (4) M2.5 x 0.45 x 14 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel) Finish: Clear anodize, mirror-polish CNC gloss Weight: 91 g (design is FEA optimized for maximum strength and minimum weight)

Models: all ALIGN TREX 700 NITRO versions (replaces stock Align part #HN7074) Note: the Elevator Servo Mount design provides superior CCPM elevator control, with an Aluminum 6061-T6 frame that prevents flex during high-torque maneuvers and provides a strong foundation for the elevator servo (no more stripped plastic threads!). Four 10mm screws are provided for frame mounting and four 14mm screws are provided to install the elevator servo for rock-solid control. Includes: - One (1) TREX 700 Nitro Aluminum Elevator Servo Mount Upgrade - Four (4) M2.5 x 0.45 x 10 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - Four (4) M2.5 x 0.45 x 14 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel) Finish: Clear anodize, mirror-polish CNC gloss Weight: 19 g (design is FEA optimized for maximum strength and minimum weight)

UNIVERSAL MOTOR MOUNT AND PINION SUPPORT FOR ALIGN TREX 700 ELECTRIC SERIES HELICOPTERS Includes: - One (1) TREX 700E Series Aluminum Universal Motor Mount - One (1) TREX 700E Series Aluminum Universal Motor Mount Plate - Two (2) TREX 700E Series Aluminum Universal Motor Mount Rails - One (1) TREX 700E Series Aluminum Universal Pinion Support Plate - Two (2) TREX 700E Series Aluminum Universal Pinion Support Rails - One (1) Radial Ball Bearing 6 x 17 x 6 mm - Two (2) M4 x 0.7 x 10 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - Two (2) M4 Flat Washers (Zinc-Plated Alloy Steel) - Four (4) M3 x 0.5 x 10 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - Four (4) M3 x 0.5 x 8 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - Four (4) M3 Flat Washers (Zinc-Plated Alloy Steel) Finish: Clear anodize, mirror-polish CNC gloss Weight: 53 g (design is FEA optimized for maximum strength and minimum weight)

English : FLYBARLESS MAIN ROTOR HOUSING FOR ALIGN TREX 700 SERIES HELICOPTERS Includes: - One (1) TREX 700 Series Aluminum Flybarless Main Rotor Housing - Two (2) M3 x 0.5 x 14 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - Two (2) M4 x 0.5 x 16 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) Finish: Clear anodize, mirror-polish CNC gloss Weight: 72 g (design is FEA optimized for maximum strength and minimum weight)

Aktionspreis CHF 17.95 anstatt CHF 19.95 • für T-REX 700E / 700 F3C / 700N • Carbonverstärkung Paddelstange (4.1x6x196mm) x 2 • Paddelgewichte (4.2x8.6x15mm) x 4 • Paddelgewichte Stahl (4.2x9.6x15mm) x 2

Alle LYNX Tuningteile wurden via CAD in Verbindung mit FEM entworfen und gefertigt um höchste Stabilität bei geringstem Gewicht zu erreichen. Maximale präzision für maximale performance! Material: 7075-T6 Aluminum Gewicht: 16g (Gesamt) Lieferumfang: 3 Stück

LYNX Heckrohrbefestigung Alle LYNX Tuningteile wurden via CAD in Verbindung mit FEM entworfen und gefertigt um höchste Stabilität bei geringstem Gewicht zu erreichen. Maximale präzision für maximale performance! Material: 7075-T6 Aluminum Gewichtt: 16g Lieferumfang: 1 Stück

4 x Quick Release Pins 2 x Quick Release Front Standoffs 2 x Quick Release Rear Standoffs 2 x Fuel Resistant Anti Vibration Pads w/ 3M™ Adhesive (peel and stick) 2 x Fuel Resistant Viton™ Grommets 2 x Viton™ O-Rings 700 Quick Release Canopy mount features a custom locking push/pull pin design made to fit the front and rear mounts on your Align 700 Helicopter. Quick Release pin is made from carbon steel, bright zinc plated with stainless steel components and is designed to stay connected to the canopy. Standoff is made from 6061-T6 aluminum and hardcoat annodized black w/anoseal. Kit is designed for use with the stock Align V1 canopy Use of any other canopy may affect the intended performance of this kit

RCBooya 700 Quick Release Canopy mount features a custom locking push/pull pin design made to fit the front 2 mounts on your Align 700 Helicopter. Quick Release pin is made from carbon steel, bright zinc plated with stainless steel components and is designed to stay connected to the canopy. Standoff is made from 6061-T6 aluminum and hardcoat annodized black w/annoseal. Kit includes: 2-Quick Release Pins 2- Front Quick Release Standoffs 2-Fuel Resistant Anti Vibration Pads w/ 3M™ Adheisve (peel and stick) 2-Viton Fuel Resistant O-Rings

Stabile Carbon Akkuaufnahme zum einfachen wechsel der Akku-Packs. Der Akku kann dank genügend aussparrungen mit mehreren Bändern befestigt werden. Material: Carbon CFK Materialstärke: 3 mm Länge: 54 mm x 290 mm

* This Titanium buckle have a right-hand thread at one end, while other end is left hand-thread. * Blade pitch angle can be adjusted easily, without snap off the linkage. * Just turn the buckle with the small tool to adjust its length.