PERFORMANCE TAIL UPGRADE V2 FOR ALIGN TREX 600 & 700 SERIES HELICOPTERS Models: all ALIGN TREX 550, 600E/ESP, 600N, and 700N versions (replaces stock Align part #H60046) Note: the Performance Tail Upgrade V2 provides superior tail control for sport and hard 3D flying styles. With dual flanged, radial ball bearing supported tail grips and a dual radial ball bearing, fully-supported thrust bearing tail rotor assembly, the new upgrade kit provides a truly slop-free, high-performance tail that is rock-solid for all maneuvers. The design is a simple retrofit for the common Align parts on the helicopter, with the ability to be used on all TREX 600E/ESP, 600 Nitro, and 700 Nitro helicopters on the market and installed in a matter of minutes. Includes: - Two (2) TREX 600/600N/700N Aluminum Tail Control Link V2 Upgrades - Two (2) Radial Ball Bearings 3 x 10 x 4 mm - Four (4) Flanged Radial Ball Bearings 2 x 5 x 2.5 mm - Two (2) M3 x 0.4 x 12 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - Two (2) M2 x 0.4 x 8 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - Two (2) M3 Flat Washers (Zinc-Plated Alloy Steel) Finish: Clear anodize, brushed CNC matte

AT550/600/700-VSM Vertical Stabilizer Mount Upgrade for Align T-Rex Includes: - One (1) E-Conversion Aluminum Vertical Stabilizer Mount Finish: Clear anodize, mirror-polish CNC gloss Weight: 2 g (design is FEA optimized for maximum strength and minimum weight)

Models: all ALIGN TREX 550E, 600E, and 600ESP series (replaces stock Align part #HN6064). Note: the Main Gear Case Upgrade for the Align TREX 600 electric series uses the stock Align 700N Main Gear (HN7019, need to purchase separately), which gives tremendous benefits to the 600 design including: increased headspeed (164T versus 170T), increased gear teeth engagement, and significantly increased strength due to the taller gear and higher contact surfaces. This upgrade is a MUST HAVE for high-power, high-voltage setups to prevent stripping of the main gear during flight and hard 3D maneuvers. Includes: - One (1) TREX 600 Aluminum Main Gear Case Upgrade - Six (6) M3 x 0.5 x 6 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel) Finish: Clear anodize, mirror-polish CNC gloss Weight: 15 g (design is FEA optimized for maximum strength and minimum weight)

FLYBARLESS MAIN ROTOR HOUSING FOR ALIGN TREX 550/600 SERIES HELICOPTERS Includes: - One (1) TREX 550/600 Series Aluminum Flybarless Main Rotor Housing - Four (4) M3 x 0.5 x 14 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) Finish: Clear anodize, mirror-polish CNC gloss Weight: 59 g (design is FEA optimized for maximum strength and minimum weight)

Modelle: alle ALIGN T-REX 550E (V1/V2), 600E/ESP, 600E PRO, and 600N (V1/V2) Benötigt: ALIGN Heckrotor Steuerbrücke Metall H60077A Lieferumfang: - (1) TREX 550/600 Series Aluminum Performance Tail Control Assembly - (1) TREX 550/600 Series Aluminum Performance Tail Control Secondary Link - (1) TREX 550/600 Series Aluminum Performance Tail Control Primary Link - (1) TREX 550/600 Series Aluminum Performance Tail Control Arm Lever - (1) TREX 550/600 Series Aluminum Performance Tail Control Bearing Holder - (1) TREX 550/600 Series Aluminum Performance Tail Control Bearing Collar - (2) Radial Ball Bearings 7 x 11 x 3 mm - (6) Flanged Radial Ball Bearings 3 x 7 x 3 mm - (1) M3 x 0.5 x 14 mm Button Head Socket Head Cap Screw (Class 12.9 BP Alloy Steel) - (4) M3 x 0.5 x 6 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - (1) M2.5 x 0.45 x 6 mm Socket Head Cap Screw (Class 12.9 BP Alloy Steel) - (1) M3 x 0.5 Nylon-Insert Locknut (Zinc-Plated Class 8 Alloy Steel) Gewicht: 8g

UNIVERSAL MOTOR MOUNT FOR ALIGN TREX 550/600 ELECTRIC SERIES HELICOPTERS Material: Aluminum 6061-T6 Models: all ALIGN TREX 550E, 600E, and 600ESP series (replaces stock Align part #H60033) The Universal Motor Mount provides the pilot the ability to run almost-all motor and gearing combinations available for the TREX 550E, 600E, and 600ESP series helicopters. With a unique Universal Motor Mount hole pattern, the design can accommodate all M4 x 25mm and M3 x 25mm motors on the market with a solid, four-bolt hole pattern for the motor installation and a strong and secure, t-channel lock system incorporated into the assembly. To adjust the motor pinion and main gear mesh, simply loosen the four side screws holding the mount to the frame, set the motor to the desired mesh, and then retighten the side screws for rock-solid hold. Includes: - One (1) TREX 550/600 Series Aluminum Universal Motor Mount Assembly - One (1) TREX 550/600 Series Aluminum Universal Motor Mount Plate - Two (2) TREX 550/600 Series Aluminum Universal Motor Mount Rails - Four (4) M4 x 0.7 x 10 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - Four (4) M4 Flat Washers (Zinc-Plated Alloy Steel) - Two (2) M3 x 0.5 x 10 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - Four (4) M3 x 0.5 x 8 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - Two (2) M3 Flat Washers (Zinc-Plated Alloy Steel) Finish: Clear anodize, mirror-polish CNC gloss Weight: 30 g (design is FEA optimized for maximum strength and minimum weight)

Aktionspreis CHF 22.00 anstatt CHF 36.75 ANTI-ROTATION BRACKET UPGRADE FOR ALIGN TREX 600 SERIES HELICOPTERS Models: ALIGN TREX 600E (replaces stock Align part #H60028) Note: the Anti-Rotation Bracket design utilizes high-end CNC machining to produce tight and accurate tolerances throughout the part, giving you the highest-level of flight control and accuracy available today. Includes: - One (1) TREX 600 Aluminum Anti-Rotation Bracket Upgrade - Two (2) M3 x 0.5 x 8 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) Finish: Clear anodize, mirror-polish CNC gloss Weight: 14 g (design is FEA optimized for maximum strength and minimum weight)

BOTTOM BRACKET UPGRADE FOR ALIGN TREX 600 SERIES HELICOPTERS Models: all ALIGN TREX 600E/ESP versions (replaces stock Align part #H60028) Includes: - One (1) TREX 600 Aluminum Bottom Bracket Upgrade - Four (4) M3 x 0.5 x 10 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - Two (2) M3 x 0.5 x 12 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - Four (4) M3 x 0.5 x 16 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - Four (4) M3 x 0.5 Nylon-Insert Locknuts (Zinc-Plated Class 8 Alloy Steel) Finish: Clear anodize, mirror-polish CNC gloss Weight: 75 g (design is FEA optimized for maximum strength and minimum weight)

BATTERY MOUNT UPGRADE FOR ALIGN TREX 600 SERIES HELICOPTERS Models: all ALIGN TREX 600E/ESP versions (replaces stock Align part #H60028) Note: new revision channels have been provided for the LiPo and/or A123 pack tie-down straps. This will provide a much stronger tray and secure attachment for the batteries during flight and 3D maneuvers, while keeping the straps secured to the tray during battery installation and removal. Includes: - One (1) TREX 600 Aluminum Battery Mount Upgrade - Four (4) M3 x 0.5 x 10 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) Finish: Clear anodize, mirror-polish CNC gloss Weight: 23 g (design is FEA optimized for maximum strength and minimum weight)

600 ESP SERIES UPGRADE KIT FOR ALIGN TREX 600ESP SERIES HELICOPTERS Models: ALIGN TREX 600ESP (replaces stock Align part #H60028) Includes: - One (1) TREX 600 Aluminum Battery Mount Upgrade - Four (4) M3 x 0.5 x 10 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - One (1) TREX 600 Aluminum Bottom Bracket Upgrade - Four (4) M3 x 0.5 x 10 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - Two (2) M3 x 0.5 x 12 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - Four (4) M3 x 0.5 x 16 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - Four (4) M3 x 0.5 Nylon-Insert Locknuts (Zinc-Plated Class 8 Steel) - Two (2) TREX 600 Aluminum Gyro Mount Upgrades - Four (4) M3 x 0.5 x 8 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)

GYRO MOUNT UPGRADE FOR ALIGN TREX 600 SERIES HELICOPTERS Models: all ALIGN TREX 600E/ESP versions (replaces stock Align part #H60028) Note: channels have been provided for tie-down straps, zip-ties, and other fastening methods for the receiver and/or gyro electronics. Includes: - One (1) TREX 600 Aluminum Gyro Mount Upgrade - Four (4) M3 x 0.5 x 8 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) Finish: Clear anodize, mirror-polish CNC gloss Weight: 11 g (design is FEA optimized for maximum strength and minimum weight)

METAL BEARING BLOCK UPGRADE FOR ALIGN TREX 600 SERIES HELICOPTERS Models: all ALIGN TREX 600E/ESP versions (replaces stock Align part #H60031) Note: the Metal Bearing Block design utilizes high-end CNC machining to produce tight and accurate tolerances throughout the part, giving you the best quality upgrade product on the market. With the addition of the thrust-bearings to support all axial loads, more power will be available for hard pitch-pumps, 3D maneuvers, and autorotations; as well as protecting the integrity of the radial bearings. This is the first upgrade on the market to provide full clearance for the elevator arm upgrade, while allowing for +/-14° pitch range using an offset upper mount. Includes: - One (1) TREX 600 Aluminum Metal Bearing Block Upgrade Set (Upper and Lower) - Two (2) Radial Ball Bearings 10 x 19 x 5 mm - Two (2) Thrust Ball Bearings 10 x 18 x 5.5 mm - Two (2) Round Hole Shims 10.1 x 14 x 1 mm Finish: Clear anodize, mirror-polish CNC gloss Weight: 15 g ea. (design is FEA optimized for maximum strength and minimum weight)

AT600ESP-ESM Elevator Servo Mount AT700E-TSM Tail Servo Mount Upgrade for all ALIGN TREX 600 PRO and ESP series (replaces stock Align part #H60183T and #H60183M). Includes: - One (1) TREX 600 ESP Aluminum Elevator Servo Mount (Same as TREX 700E Aluminum Tail Servo Mount) - Four (4) M2.5 x 0.45 x 8 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - Four (4) M2.5 x 0.45 x 14 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel) Finish: Clear anodize, mirror-polish CNC gloss Weight: 10 g (design is FEA optimized for maximum strength and minimum weight) Models: all ALIGN TREX 600ESP series (replaces stock Align part #H60183T). all ALIGN TREX 700E series (AT700E-TSM).