PERFORMANCE TAIL UPGRADE V2 FOR ALIGN TREX 600 & 700 SERIES HELICOPTERS Models: all ALIGN TREX 550, 600E/ESP, 600N, and 700N versions (replaces stock Align part #H60046) Note: the Performance Tail Upgrade V2 provides superior tail control for sport and hard 3D flying styles. With dual flanged, radial ball bearing supported tail grips and a dual radial ball bearing, fully-supported thrust bearing tail rotor assembly, the new upgrade kit provides a truly slop-free, high-performance tail that is rock-solid for all maneuvers. The design is a simple retrofit for the common Align parts on the helicopter, with the ability to be used on all TREX 600E/ESP, 600 Nitro, and 700 Nitro helicopters on the market and installed in a matter of minutes. Includes: - Two (2) TREX 600/600N/700N Aluminum Tail Control Link V2 Upgrades - Two (2) Radial Ball Bearings 3 x 10 x 4 mm - Four (4) Flanged Radial Ball Bearings 2 x 5 x 2.5 mm - Two (2) M3 x 0.4 x 12 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - Two (2) M2 x 0.4 x 8 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - Two (2) M3 Flat Washers (Zinc-Plated Alloy Steel) Finish: Clear anodize, brushed CNC matte

AT550/600/700-VSM Vertical Stabilizer Mount Upgrade for Align T-Rex Includes: - One (1) E-Conversion Aluminum Vertical Stabilizer Mount Finish: Clear anodize, mirror-polish CNC gloss Weight: 2 g (design is FEA optimized for maximum strength and minimum weight)

FLYBARLESS MAIN ROTOR HOUSING FOR ALIGN TREX 550/600 SERIES HELICOPTERS Includes: - One (1) TREX 550/600 Series Aluminum Flybarless Main Rotor Housing - Four (4) M3 x 0.5 x 14 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) Finish: Clear anodize, mirror-polish CNC gloss Weight: 59 g (design is FEA optimized for maximum strength and minimum weight)

Modelle: alle ALIGN T-REX 550E (V1/V2), 600E/ESP, 600E PRO, and 600N (V1/V2) Benötigt: ALIGN Heckrotor Steuerbrücke Metall H60077A Lieferumfang: - (1) TREX 550/600 Series Aluminum Performance Tail Control Assembly - (1) TREX 550/600 Series Aluminum Performance Tail Control Secondary Link - (1) TREX 550/600 Series Aluminum Performance Tail Control Primary Link - (1) TREX 550/600 Series Aluminum Performance Tail Control Arm Lever - (1) TREX 550/600 Series Aluminum Performance Tail Control Bearing Holder - (1) TREX 550/600 Series Aluminum Performance Tail Control Bearing Collar - (2) Radial Ball Bearings 7 x 11 x 3 mm - (6) Flanged Radial Ball Bearings 3 x 7 x 3 mm - (1) M3 x 0.5 x 14 mm Button Head Socket Head Cap Screw (Class 12.9 BP Alloy Steel) - (4) M3 x 0.5 x 6 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - (1) M2.5 x 0.45 x 6 mm Socket Head Cap Screw (Class 12.9 BP Alloy Steel) - (1) M3 x 0.5 Nylon-Insert Locknut (Zinc-Plated Class 8 Alloy Steel) Gewicht: 8g

AT600ESP-ESM Elevator Servo Mount AT700E-TSM Tail Servo Mount Upgrade for all ALIGN TREX 600 PRO and ESP series (replaces stock Align part #H60183T and #H60183M). Includes: - One (1) TREX 600 ESP Aluminum Elevator Servo Mount (Same as TREX 700E Aluminum Tail Servo Mount) - Four (4) M2.5 x 0.45 x 8 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - Four (4) M2.5 x 0.45 x 14 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel) Finish: Clear anodize, mirror-polish CNC gloss Weight: 10 g (design is FEA optimized for maximum strength and minimum weight) Models: all ALIGN TREX 600ESP series (replaces stock Align part #H60183T). all ALIGN TREX 700E series (AT700E-TSM).

BATTERY TRAY UPGRADE FOR ALIGN TREX 600 PRO ELECTRIC SERIES HELICOPTERS The Battery Tray Upgrade provides the best support for the LiPos during flight, with an ultra-light and high-strength frame design that is a perfect match to the stock rails of the TREX 600E PRO. In addition, the upgrade includes four KDE Direct LiPo Retaining Straps optimally sized for the four LiPo channel slots incorporated into the tray design; providing optimal security and slop-free retention of the LiPos during extreme 3D maneuvers. The upgrade provides a full-length, front-support rail and integrated retaining-strap slots for smooth, bind-free installation of the power system to the 600E PRO latch-style receiver mount design.. Includes: - One (1) TREX 600E PRO Series Aluminum Battery Tray Upgrade - Four (4) KDE Direct LiPo Retaining Straps Finish: Clear anodize, mirror-polish CNC gloss Weight: 45 g (design is FEA optimized for maximum strength and minimum weight)

THRUSTED METAL BEARING BLOCK SET FOR ALIGN TREX 600 PRO ELECTRIC SERIES HELICOPTERS all ALIGN TREX 600E PRO series (replaces stock Align part #H60217 and H60218). the Thrusted Metal Bearing Block design utilizes high-end CNC machining to produce tight and accurate tolerances throughout the part, giving you the best quality upgrade product on the market. With the addition of the thrust-bearings to support all axial loads, more power will be available for hard pitch-pumps, 3D maneuvers, and autorotations; as well as protecting the integrity of the radial bearings. The new design incorporates bearing-retaining button head socket head cap screws and updated machining for easier installation and durability. In addition, the Elevator Lever Upgrade is included to provide proper clearance and perfect alignment of the elevator mechanics to the servo for precise, interference-free operation. Includes: - Two (2) TREX 600E PRO Series Aluminum Thrusted Metal Bearing Blocks - One (1) TREX 600E PRO Series Aluminum Elevator Lever Upgrade - Two (2) Radial Ball Bearings 10 x 19 x 5 mm - Two (2) Thrust Ball Bearings 10 x 18 x 5.5 mm - Two (2) Round Hole Shims 10.1 x 14 x 1 mm - Eight (8) M2.5 x 0.45 x 4 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel) Finish: Clear anodize, mirror-polish CNC gloss Weight: Thrusted Bearing Blocks: 16 g ea. (design is FEA optimized for maximum strength and minimum weight) Elevator Lever Upgrade: 6 g (design is FEA optimized for maximum strength and minimum weight)

FOR ALIGN TREX 600 PRO ELECTRIC SERIES HELICOPTERS Material: Aluminum 6061-T6 Models: all ALIGN TREX 600E PRO series (replaces stock Align part H60214). Note: the Rear Frame Mounting Block design provides superior tail control and authority, with an Aluminum 6061-T6 crossbar construction that prevents flex during high-torque maneuvers of both the helicopter rear frame section and the connected tail boom braces. The upgrade incorporates the landing skid mounts and crossbar into one high-strength design; offering significantly improved stiffness and strength of this critical area for tail support and resultant control. Includes: - One (1) TREX 600E PRO Series Aluminum Rear Frame Mounting Block - Two (2) M3 x 0.5 x 14 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) Finish: Clear anodize, mirror-polish CNC gloss Weight: 9 g (design is FEA optimized for maximum strength and minimum weight)

FOR ALIGN TREX 600 PRO ELECTRIC SERIES HELICOPTERS Note: the Universal Motor Mount provides the pilot the ability to run almost-all motor and gearing combinations available for the TREX 600E PRO, with the ability to adjust for 12T through 18T MOD 1.0 pinion sizes when meshed with the standard size, 115T MOD1.0 main drive gears. With a unique Universal Motor Mount hole pattern, the design can accommodate all M4 x 30mm, M4 x 25mm, and M3 x 25mm motors on the market with a solid, four-bolt hole pattern installation. Included in the design is the adjustable Universal Pinion Support, which has an oversized, 6 x 17 x 6mm radial bearing for incredible strength, longevity, and durability for the high-power system of the 90-class electrics. Includes: - One (1) TREX 600E PRO Series Aluminum Universal Motor Mount and Pinion Support Assembly - One (1) TREX 600E PRO Series Aluminum Universal Motor Base Plate - Two (2) TREX 600E PRO Series Aluminum Universal Motor Base Adjustment Rails - One (1) TREX 600E PRO Series Aluminum Universal Pinion Support Plate - Two (2) TREX 600E PRO Series Aluminum Universal Pinion Support Adjustment Rails - One (1) Radial Ball Bearing 6 x 17 x 6 mm - Four (4) M4 x 0.7 x 10 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) - Four (4) M4 Flat Washers (Zinc-Plated Alloy Steel) - Eight (8) M3 x 0.5 x 8 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel) Finish: Clear anodize, mirror-polish CNC gloss Weight: 39 g (design is FEA optimized for maximum strength and minimum weight) Important: for proper operation of the Universal Motor Mount assembly (alignment and strength of mounting hold), the length of the side-rail screws is critical. A maximum allowable length of 9.0mm (from the underside of the socket head cap screw to the end of the threads) is required for proper installation. Appropriate 8.0mm length screws are provided for the installation.