| |
 |
| KDE550/ 600/700 Series Performance Tail Upgrade V2 |
|
CHF 26.00 |
|
 |
 |
| [KDE Direct: AT550/600/700-PTU-V2] |
|
|
|
 |
|
|
 |
|
PERFORMANCE TAIL UPGRADE V2
FOR ALIGN TREX 600 & 700 SERIES HELICOPTERS
Models: all ALIGN TREX 550, 600E/ESP, 600N, and 700N versions (replaces stock Align part #H60046)
Note: the Performance Tail Upgrade V2 provides superior tail control for sport and hard 3D flying styles. With dual
flanged, radial ball bearing supported tail grips and a dual radial ball bearing, fully-supported thrust bearing tail rotor
assembly, the new upgrade kit provides a truly slop-free, high-performance tail that is rock-solid for all maneuvers. The
design is a simple retrofit for the common Align parts on the helicopter, with the ability to be used on all TREX
600E/ESP, 600 Nitro, and 700 Nitro helicopters on the market and installed in a matter of minutes.
Includes:
- Two (2) TREX 600/600N/700N Aluminum Tail Control Link V2 Upgrades
- Two (2) Radial Ball Bearings 3 x 10 x 4 mm
- Four (4) Flanged Radial Ball Bearings 2 x 5 x 2.5 mm
- Two (2) M3 x 0.4 x 12 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Two (2) M2 x 0.4 x 8 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Two (2) M3 Flat Washers (Zinc-Plated Alloy Steel)
Finish:
Clear anodize, brushed CNC matte
|
|
|
|
|
|
|
|
|
| |
|
| KDE 550/600/700 Vertical Stabilizer Mount Upgrade |
|
CHF 18.00 |
|
|
|
| [KDE Direct: AT550/600/700-VSM] |
|
|
|
|
|
|
 |
|
AT550/600/700-VSM Vertical Stabilizer Mount Upgrade for Align T-Rex
Includes:
- One (1) E-Conversion Aluminum Vertical Stabilizer Mount
Finish:
Clear anodize, mirror-polish CNC gloss
Weight:
2 g (design is FEA optimized for maximum strength and minimum weight)
|
|
|
|
|
|
|
|
|
| |
|
| KDE 550 / 600 Battery Mount Upgrade |
|
CHF 43.00 |
|
|
|
| [KDE Direct: AT550/600-BMU] |
|
|
|
|
|
|
 |
|
BATTERY MOUNT UPGRADE
FOR ALIGN TREX 550/600 SERIES HELICOPTERS
Models: all ALIGN TREX 600E/ESP versions (replaces stock Align part #H60028)
Note: new revision channels have been provided for the LiPo and/or A123 pack tie-down straps. This will provide a
much stronger tray and secure attachment for the batteries during flight and 3D maneuvers, while keeping the straps
secured to the tray during battery installation and removal.
Includes:
- One (1) TREX 600 Aluminum Battery Mount Upgrade
- Four (4) M3 x 0.5 x 10 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
Finish:
Clear anodize, mirror-polish CNC gloss
Weight:
23 g (design is FEA optimized for maximum strength and minimum weight)
|
|
|
|
|
|
|
|
|
| |
|
| KDE 550 / 600 Main Gear Case Upgrade |
|
CHF 24.10 |
|
|
|
| [KDE Direct: AT550/600-MGC] |
|
|
|
|
|
|
 |
|
Models: all ALIGN TREX 550E, 600E, and 600ESP series (replaces stock Align part #HN6064).
Note: the Main Gear Case Upgrade for the Align TREX 600 electric series uses the stock Align 700N Main Gear (HN7019, need to purchase separately), which gives tremendous benefits to the 600 design including: increased headspeed (164T versus 170T), increased gear teeth engagement, and significantly increased strength due to the taller gear and higher contact surfaces. This upgrade is a MUST HAVE for high-power, high-voltage setups to prevent stripping of the main gear during flight and hard 3D maneuvers.
Includes:
- One (1) TREX 600 Aluminum Main Gear Case Upgrade
- Six (6) M3 x 0.5 x 6 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
Finish:
Clear anodize, mirror-polish CNC gloss
Weight:
15 g (design is FEA optimized for maximum strength and minimum weight)
|
|
|
|
|
|
|
|
|
| |
|
| KDE 550/600 FLYBARLESS MAIN ROTOR HOUSING |
|
CHF 82.00 |
|
|
|
| [KDE Direct: AT550/600-MRHFB] |
|
|
|
|
|
|
 |
|
FLYBARLESS MAIN ROTOR HOUSING
FOR ALIGN TREX 550/600 SERIES HELICOPTERS
Includes:
- One (1) TREX 550/600 Series Aluminum Flybarless Main Rotor Housing
- Four (4) M3 x 0.5 x 14 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
Finish:
Clear anodize, mirror-polish CNC gloss
Weight:
59 g (design is FEA optimized for maximum strength and minimum weight)
|
|
|
|
|
|
|
|
|
| |
|
| KDE 550 Gyro Mount Upgrade |
|
CHF 28.00 |
|
|
|
|
|
|
|
 |
|
GYRO MOUNT UPGRADE
FOR ALIGN TREX 550 ELECTRIC SERIES HELICOPTERS
Includes:
- One (1) TREX 550 Series Aluminum Gyro Mount Upgrade
- Four (4) M2.5 x 0.45 x 14 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
Finish:
Clear anodize, mirror-polish CNC gloss
Weight:
9 g (design is FEA optimized for maximum strength and minimum weight)
|
|
|
|
|
|
|
|
|
| |
|
| KDE 600 Anti-Rotation Bracket Upgrade |
|
CHF 22.00 |
|
|
|
| [KDE Direct: AT600-ARB] |
|
Normalpreis CHF 22.00 (Normalpreis CHF 36.75) |
|
|
|
|
 |
|
Aktionspreis CHF 22.00 anstatt CHF 36.75
ANTI-ROTATION BRACKET UPGRADE
FOR ALIGN TREX 600 SERIES HELICOPTERS
Models: ALIGN TREX 600E (replaces stock Align part #H60028)
Note: the Anti-Rotation Bracket design utilizes high-end CNC machining to produce tight and accurate tolerances
throughout the part, giving you the highest-level of flight control and accuracy available today.
Includes:
- One (1) TREX 600 Aluminum Anti-Rotation Bracket Upgrade
- Two (2) M3 x 0.5 x 8 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
Finish:
Clear anodize, mirror-polish CNC gloss
Weight:
14 g (design is FEA optimized for maximum strength and minimum weight)
|
|
|
|
|
|
|
|
|
| |
|
| KDE 600 Bottom Bracket Upgrade |
|
CHF 99.00 |
|
|
|
|
|
|
|
 |
|
BOTTOM BRACKET UPGRADE
FOR ALIGN TREX 600 SERIES HELICOPTERS
Models: all ALIGN TREX 600E/ESP versions (replaces stock Align part #H60028)
Includes:
- One (1) TREX 600 Aluminum Bottom Bracket Upgrade
- Four (4) M3 x 0.5 x 10 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Two (2) M3 x 0.5 x 12 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Four (4) M3 x 0.5 x 16 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Four (4) M3 x 0.5 Nylon-Insert Locknuts (Zinc-Plated Class 8 Alloy Steel)
Finish:
Clear anodize, mirror-polish CNC gloss
Weight:
75 g (design is FEA optimized for maximum strength and minimum weight)
|
|
|
|
|
|
|
|
|
| |
|
| KDE 600 ESP Series Upgrade Kit |
|
CHF 198.90 |
|
|
|
| [KDE Direct: AT600ESP-KIT] |
|
|
|
|
|
|
 |
|
600 ESP SERIES UPGRADE KIT
FOR ALIGN TREX 600ESP SERIES HELICOPTERS
Models: ALIGN TREX 600ESP (replaces stock Align part #H60028)
Includes:
- One (1) TREX 600 Aluminum Battery Mount Upgrade
- Four (4) M3 x 0.5 x 10 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- One (1) TREX 600 Aluminum Bottom Bracket Upgrade
- Four (4) M3 x 0.5 x 10 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Two (2) M3 x 0.5 x 12 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Four (4) M3 x 0.5 x 16 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Four (4) M3 x 0.5 Nylon-Insert Locknuts (Zinc-Plated Class 8 Steel)
- Two (2) TREX 600 Aluminum Gyro Mount Upgrades
- Four (4) M3 x 0.5 x 8 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
|
|
|
|
|
|
|
|
|
| |
|
| KDE 600 Gyro Mount Upgrade |
|
CHF 31.00 |
|
|
|
|
|
|
|
 |
|
GYRO MOUNT UPGRADE
FOR ALIGN TREX 600 SERIES HELICOPTERS
Models: all ALIGN TREX 600E/ESP versions (replaces stock Align part #H60028)
Note: channels have been provided for tie-down straps, zip-ties, and other fastening methods for the receiver and/or
gyro electronics.
Includes:
- One (1) TREX 600 Aluminum Gyro Mount Upgrade
- Four (4) M3 x 0.5 x 8 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
Finish:
Clear anodize, mirror-polish CNC gloss
Weight:
11 g (design is FEA optimized for maximum strength and minimum weight)
|
|
|
|
|
|
|
|
|
| |
|
| KDE 600 Metal Bearing Block Upgrade |
|
CHF 55.00 |
|
|
|
|
|
|
|
 |
|
METAL BEARING BLOCK UPGRADE
FOR ALIGN TREX 600 SERIES HELICOPTERS
Models: all ALIGN TREX 600E/ESP versions (replaces stock Align part #H60031)
Note: the Metal Bearing Block design utilizes high-end CNC machining to produce tight and accurate tolerances
throughout the part, giving you the best quality upgrade product on the market. With the addition of the thrust-bearings
to support all axial loads, more power will be available for hard pitch-pumps, 3D maneuvers, and autorotations; as well
as protecting the integrity of the radial bearings. This is the first upgrade on the market to provide full clearance for
the elevator arm upgrade, while allowing for +/-14° pitch range using an offset upper mount.
Includes:
- One (1) TREX 600 Aluminum Metal Bearing Block Upgrade Set (Upper and Lower)
- Two (2) Radial Ball Bearings 10 x 19 x 5 mm
- Two (2) Thrust Ball Bearings 10 x 18 x 5.5 mm
- Two (2) Round Hole Shims 10.1 x 14 x 1 mm
Finish:
Clear anodize, mirror-polish CNC gloss
Weight:
15 g ea. (design is FEA optimized for maximum strength and minimum weight)
|
|
|
|
|
|
|
|
|
| |
|
| KDE 600ESP/PRO Elevator- / 700E Tail- Servo Mount Upgrade |
|
CHF 26.00 |
|
|
|
| [KDE Direct: AT600P/ESP-ESM] |
|
|
|
|
|
|
 |
|
AT600ESP-ESM Elevator Servo Mount
AT700E-TSM Tail Servo Mount
Upgrade for all ALIGN TREX 600 PRO and ESP series (replaces stock Align part #H60183T and #H60183M).
Includes:
- One (1) TREX 600 ESP Aluminum Elevator Servo Mount
(Same as TREX 700E Aluminum Tail Servo Mount)
- Four (4) M2.5 x 0.45 x 8 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Four (4) M2.5 x 0.45 x 14 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
Finish:
Clear anodize, mirror-polish CNC gloss
Weight:
10 g (design is FEA optimized for maximum strength and minimum weight)
Models:
all ALIGN TREX 600ESP series (replaces stock Align part #H60183T).
all ALIGN TREX 700E series (AT700E-TSM).
|
|
|
|
|
|
|
|
|
| |
|
| KDE 600 Pro REAR FRAME MOUNTING BLOCK |
|
CHF 25.90 |
|
|
|
| [KDE Direct: AT600P-RFMB] |
|
|
|
|
|
|
 |
|
FOR ALIGN TREX 600 PRO ELECTRIC SERIES HELICOPTERS
Material: Aluminum 6061-T6
Models: all ALIGN TREX 600E PRO series (replaces stock Align part H60214).
Note: the Rear Frame Mounting Block design provides superior tail control and authority, with an Aluminum 6061-T6
crossbar construction that prevents flex during high-torque maneuvers of both the helicopter rear frame section and the
connected tail boom braces. The upgrade incorporates the landing skid mounts and crossbar into one high-strength
design; offering significantly improved stiffness and strength of this critical area for tail support and resultant control.
Includes:
- One (1) TREX 600E PRO Series Aluminum Rear Frame Mounting Block
- Two (2) M3 x 0.5 x 14 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
Finish:
Clear anodize, mirror-polish CNC gloss
Weight:
9 g (design is FEA optimized for maximum strength and minimum weight)
|
|
|
|
|
|
|
|
|
| |
|
| KDE 600 Pro UNIVERSAL MOTOR MOUNT AND PINION SUPPORT |
|
CHF 44.00 |
|
|
|
|
|
|
|
 |
|
FOR ALIGN TREX 600 PRO ELECTRIC SERIES HELICOPTERS
Note: the Universal Motor Mount provides the pilot the ability to run almost-all motor and gearing combinations available
for the TREX 600E PRO, with the ability to adjust for 12T through 18T MOD 1.0 pinion sizes when meshed with the standard
size, 115T MOD1.0 main drive gears. With a unique Universal Motor Mount hole pattern, the design can accommodate all
M4 x 30mm, M4 x 25mm, and M3 x 25mm motors on the market with a solid, four-bolt hole pattern installation. Included in
the design is the adjustable Universal Pinion Support, which has an oversized, 6 x 17 x 6mm radial bearing for incredible
strength, longevity, and durability for the high-power system of the 90-class electrics.
Includes:
- One (1) TREX 600E PRO Series Aluminum Universal Motor Mount and Pinion Support Assembly
- One (1) TREX 600E PRO Series Aluminum Universal Motor Base Plate
- Two (2) TREX 600E PRO Series Aluminum Universal Motor Base Adjustment Rails
- One (1) TREX 600E PRO Series Aluminum Universal Pinion Support Plate
- Two (2) TREX 600E PRO Series Aluminum Universal Pinion Support Adjustment Rails
- One (1) Radial Ball Bearing 6 x 17 x 6 mm
- Four (4) M4 x 0.7 x 10 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Four (4) M4 Flat Washers (Zinc-Plated Alloy Steel)
- Eight (8) M3 x 0.5 x 8 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
Finish:
Clear anodize, mirror-polish CNC gloss
Weight:
39 g (design is FEA optimized for maximum strength and minimum weight)
Important: for proper operation of the Universal Motor Mount
assembly (alignment and strength of mounting hold), the length
of the side-rail screws is critical. A maximum allowable length of
9.0mm (from the underside of the socket head cap screw to the
end of the threads) is required for proper installation.
Appropriate 8.0mm length screws are provided for the installation.
|
|
|
|
|
|
|
|
|
| |
|
| T-Rex 600 N Limited Edition Hauptrotorkopf |
|
CHF 215.10 |
|
|
|
| [Align: HN6109] |
|
Normalpreis CHF 239.00 |
|
|
|
|
 |
|
Aktionspreis CHF 215.10 anstatt CHF 239.00
Limited Edition Hauptrotorkopf für T-Rex 600 Nitro
|
 Informationen...
|
1 x Metal main rotor housing set
1 x Metal head stoppe
2 x Pin x 2(F1.5x18.7mm)
2 x Linkage ball A(M3x4)
11 x Linkage ball B(M3x3)
2 x Metal main rotor holder
2 x Metal main rotor holder Collar
8 x Bearing 683ZZ
2 x Bearing MR83ZZ
2 x Bearing MR74ZZ
4 x Bearing FMR52ZZ
2 x Bearing 6706ZZ
4 x Bearing MR148ZZ
2 x Thrust bearing F6-14M
2 x Linkage ball F(M3.5x4)
4 x Collar
1 x Feathering shaft
2 x Damper rubber
2 x Feathering shaft washer
6 x Washer
4 x Socket screw (M2x5mm)
2 x Socket screw (M4x10mm)
1 x Socket screw (M3x10mm)
4 x Socket screw (M3x5mm)
4 x Socket button head screw x 4(M3x12mm)
2 x Flybar control rod x 2
1 x M3 Nut x 1
2 x M4 Nut x 2
4 x Spindle bearing spacer x 4
1 x Metal flybar seesaw holder x 1
2 x Socket collar screw x 2(M4x27mm)
1 x Feathering shaft sleeve x 1
2 x Spacer x2
2 x Metal SF Mixing arm x 2
2 x Metal washout control arm x 2
2 x Radius arm x 2
2 x M3 collar screw x 2
1 x Socket collar screw x 1(M3x22mm)
1 x Metal washout base x 1
1 x CCPM Metal Swashplate x 1
1 x Metal cover x 1
1 x Metal stand x 1
2 x Grommet x 2
1 x Ball bearing x 1
2 x M4 Set screw x 2
2 x Linkage rod A x 2
2 x Linkage rod B x 2
2 x Linkage rod C x 2
12 x Linkage rod x 12
|
|
|
|
|
|
| |
|
| T-Rex 600 Heck Brückenunterstützung (Tail Brace Support Bridge) |
|
CHF 18.30 |
|
|
|
|
|
|
|
-KSJ535.jpg "KSJ535 - Heck Brueckenunterstuetzung (Tail Brace Support Bridge) (freakware) KSJ535") |
|
Heckstrebenverbinder - zur Verringerung der Schwingungen daraus resultiert höhere Empfindlichkeit des Gyros möglich
|
|
|
|
|
|
|
|
|
| |
|
| Lynx Heckrohrbefestigung T-Rex 600 |
|
CHF 29.90 |
|
|
|
|
|
|
|
 |
|
Alle LYNX Tuningteile wurden via CAD in Verbindung mit FEM entworfen und gefertigt um höchste Stabilität bei geringstem Gewicht zu erreichen.
Maximale präzision für maximale performance!
Material: 7075-T6 Aluminum
Gewichtt: 14g
Lieferumfang: 1 Stück
|
|
|
|
|
|
|
|
|
| |
|
| Lynx Heckanlenkungsführung T-Rex 550 / 600 / 700 (3er Pack) |
|
CHF 59.90 |
|
|
|
|
|
|
|
-LX0069.jpg "LX0069 - Heckanlenkungsfuehrung T-Rex 600 _ 700 (3er Pack) (LYNX) LX0069") |
|
Alle LYNX Tuningteile wurden via CAD in Verbindung mit FEM entworfen und gefertigt um höchste Stabilität bei geringstem Gewicht zu erreichen.
Maximale präzision für maximale performance!
Material: 7075-T6 Aluminum
Gewicht: 16g (Gesamt)
Lieferumfang: 3 Stück
|
|
|
|
|
|
|
|
|
| |
|
| T-Rex 600 ESP Electric EXTREME Kabinenhaubenh. mit AVT |
|
CHF 19.00 |
|
|
|
| [RCbooya LLC: RCB-6EECMAVT] |
|
Normalpreis CHF 19.00 (Normalpreis CHF 29.00) |
|
|
|
|
 |
|
Aktionspreis CHF 19.00 anstatt CHF 29.00
2 x Thumbscrews
2 x Standoffs
Canopy Mount Features
-Unique thumbscrew design retains thumbscrew in canopy when not in use
-Components are hardcoat annodized w/anoseal to a surface hardness of 45-55 Rockewell 'C'
-AVT™ makes your thumbscrews better resistant to loosening caused by transverse vibration
-Weight 8 grams per kit
Made from 7075-T6 Aluminum,hardcoat annodized black w/anoseal for EXTREME duability this kit replaces the 2 factory standoffs on your Align 600 Electric series helicopter and provides a positive canopy locking system.
Requires use of stock ALIGN canopy grommets
|
|
|
|
|
|
|
|
|
| |
|
| TORSION TAIL BLADES 96 mm NIGHT |
|
CHF 74.00 |
|
|
|
|
|
|
|
 |
|
Modell: TBC096 NIGHT
Längen: 96 mm
Blattwurzel: 5 mm
Bohrung: 3 mm
Material: CFK
Gewicht: 5,5 g
|
|
|
|
|
|
|
|
|
| |
|
| T-Rex 600 Tuning Dämpfergummis T-Rex 600 |
|
CHF 23.45 |
|
|
|
|
|
|
|
 |
|
Tuning Dämpfergummis für T-Rex 600 - grün von Trueblood EngeneeringThese Dampeners are made from a new Super Hard Green material. These are by far the hardest most durable Dampeners available to date!This upgrade replaces the stock Align Dampeners. The advantages of these dampeners is simple. They are able to produce a more responsive and tighter feeling Heli by filling the entire dampening area of the head block with harder, and longer lasting material. The dampeners are designed specifically for the Trex 700 head block and spindle, giving a tight dampening solution without needing to over-compress the rubber with spacers.Packungsinhalt: 2 Stück
|
|
|
|
|
|
|
|
|
| |
|
| Titanium Turnbuckles (pitch)(for TRex 600 series) |
|
CHF 16.90 |
|
|
|
|
|
|
|
(for-TRex-600-series)-X-EA-051.jpg "X-EA-051 - Titanium Turnbuckles (pitch)(for TRex 600 series) (Xtreme) X-EA-051") |
|
* This Titanium buckle have a right-hand thread at one end, while other end is left hand-thread.
* Blade pitch angle can be adjusted easily, without snap off the linkage.
* Just turn the buckle with the small tool to adjust its length.
|
|
|
|
|
|
|
|
|
Beschaffungsartikel: ca. 6 bis 20 Arbeitstage je nach Artikel
Ab Lager verfügbar, Versand in der Regel innerhalb 24 Stunden
Im Zulauf, Datum beachten
Beschaffungsartikel: ca. 6 bis 20 Arbeitstage je nach Artikel
Die Angaben zu den Produkten, Lagerstatus usw. sind Vorbildlich.
Hallo Urs, merci noch einmal für die schnelle Lieferung. Ich kann RC Outlet bedenkenlos jedem weiterempfehlen.